- Different drilling positions for 1/4 in., 5/16 in. and 3/8 in. stock
- Steel stops adjust the depth of the cut
- Revolving sintered turret accommodates six drill bit sizes
- Dowel diameters supported: 1/4 in., 5/16 in., 3/8 in.
- Dowel and tenon center setting range: 3/16 in. I.D. to 1/2 in. O.D .
- Drill bit sizes supported: 3/16 in., 1/4 in., 5/16 in., 3/8 in., 7/16 in., 1/2 in.
- 1/4 in., 5/16 in. and 3/8 in. brad point drill bits
- 1/4 in., 5/16 in. and 3/8 in. steel drill stops
- 30 fluted dowel pins (ten each 1/4 in., 5/16 in., 3/8 in.)
- Hex wrench
- Prop 65
⚠ WARNING: This product can expose you to chemicals including wood dust, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.