Rugged True RMS Multimeter with NCV Detector and Lo-Z Mode

ITEM # DMM570

Rugged True RMS Multimeter with NCV Detector and Lo-Z Mode

In addition to the features in its name, the #DMM570 Rugged True RMS Multimeter with NCV Detector and Lo-Z Mode is notable for its ability to measure capacitance, frequency and surface temperature (via an included Type "K" probe). It's a favorite of electrical contractors, HVAC/R technicians and MRO professionals.

More

Best For:

Videos:

Features

Details

  • 19 functions, 48 ranges
  • Measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency and duty cycle
  • Also measures surface temperature using the included Type "K" thermocouple probe
  • Uses a beeper to verify the integrity of diodes and check circuits for continuity
  • True RMS measurements
  • Operating in Lo-Z (low-impedance) mode eliminates "ghost" AC voltage readings caused by capacitive coupling of voltage from power supply conductors onto adjacent unused conductors
  • 6 ft. (1.8m) drop-resistant
  • ETL certified to meet the CAT III 1000V, CAT IV 600V safety standard
  • Auto or manual ranging
  • Non-contact voltage (NCV) detector
  • Large, backlit 6600-count LCD + analog bar graph
  • Min/max memory + data hold
  • Relative measurement mode
  • Auto power off (can be disabled)
  • NIST calibration is available
Specifications

Specifications

  • AC voltage measurement ranges: 0 to 660mV/6.6V/66V/600V/1000V
  • AC voltage measurement accuracy/resolution: ±(1.5% + 2 digits) or better/100μV (max)
  • DC voltage measurement ranges: 0 to 660mV/6.6V/66V/600V/1000V
  • DC voltage measurement accuracy/resolution: ±(0.8% + 2 digits) or better/100μV (max)
  • AC/DC current measurement ranges: 0 to 660μA/6.6mA/66mA/660mA/10A
  • AC current measurement accuracy/resolution: ±(3% + 10 digits) or better/0.1μA (max) 
  • DC current measurement accuracy/resolution: ±(2% + 5 digits) or better/0.1μA (max) 
  • Resistance measurement ranges: 0 to 660Ω/6.6kΩ/66kΩ/660kΩ/6.6MΩ/66MΩ
  • Resistance measurement accuracy/resolution: ±(1.5% + 5 digits) or better/0.1Ω (max)
  • Frequency measurement ranges: 10Hz to 66Hz/660Hz/6.6kHz/66kHz/660kHz/6.6MHz/66MHz
  • Frequency measurement accuracy/resolution: ±(1.5% of reading + 5 digits)/0.01Hz
  • Capacitance measurement ranges: 0 to 6.6nF/66nF/660nF/6.6μF/66μF/660μF/6.6mF/66mF
  • Capacitance measurement accuracy/resolution: ±(4% + 5 digits) or better/1pF
  • Temperature measurement range: 32° to 1832°F (0° to 1000°C)
  • Temperature measurement accuracy/resolution: ±(1% + 3 digits)/1°
  • Temperature range/accuracy of included probe: -40° to 500°F (-40° to 260°C)/±(2% of reading) + 2 digits)
  • Duty cycle measurement range/accuracy/resolution: 10 to 95%/±2%/0.1%
  • NCV detection range/distance: >110VAC/0.25 in. (6mm), max
  • Overload protection level: 1000V in voltage and current modes; 250VAC/DCRMS in other modes
  • Input impedance: 10MΩ in all modes (except 400kΩ in Lo-Z mode)
  • Water/oil/dust protection level: IP54
  • Display size and type: 3-3/4 digit (6600 count) dual-readout LCD with 66-segment analog bar graph at bottom
  • Auto power off: After 15 minutes of inactivity
  • Operating temperature: 32° to 140°F (0° to 60°C)@<80% RH
  • Weight (including battery): 14.8 oz. (420g)
  • Power source: "9V" battery (included)

Includes

  • Type "K" thermocouple probe
  • Adaptor for thermocouples with spade lugs
  • CAT III 1000V/10A- rated test leads with alligator clips
  • Magnetic meter hanging strap
  • Cloth pouch with belt loop
  • Battery
  • 3-year limited waranty

DIMENSIONS

      6.9 x 3.3 x 2.1 in. (176 x 84 x 54mm)
Resources
Accessories