Limited Quantities Available!
The Basic Faucet Repair kit stops leaking faucets by removing imperfections in worn faucet seats. With three hardened-steel dressers, the Faucet Repair Kit makes quick repairs to 1/2”, 5/16” and 5/8” faucet seats. The kit includes a self-aligning guide cone to ensure even cuts are made on the seat. Also included are four replacement washers and a faucet screw. This easy-to-use tool works great on sinks, tubs and showers.
• For making economic repairs to leaking faucets in showers, sinks and tubs.
• Hardened-steel dressers repair 1/2”, 5/16” and 5/8” faucet seats.
• Self-aligning cone for even cuts.
• Removable T-handle for storage.
• Four replacement washers – 2 x 1/2” and 2 x 9/16”
• One replacement faucet screw – 8/32” x 3/8” pan head
Instructions:
Faucets with Cap Nuts:
1. Remove the faucet screw cap (if necessary), faucet handle screw and handle.
2. Remove cap nut.
3. Remove faucet stem and replace worn washer with a new larger washer supplied in the repair kit.
4. Insert the Reseater Tool into the faucet opening and set the adjustable nut height to just above the opening.
5. Apply liquid or soap to the tool’s plastic washer.
6. Slide the cap nut over the tool and on to faucet.
7. Insert the T-handle into the tool.
8. Without applying excessive pressure, turn the Reseater Tool clockwise three full turns while tightening the cap nut.
9. Remove T-handle, cap nut and remove tool from faucet.
10. Inspect seat for smoothness. Repeat if necessary.
11. Reassemble and check for leaks.
Faucets without Cap Nuts:
1. Remove the faucet screw cap (if necessary), faucet handle screw and handle.
2. Remove faucet stem and replace worn washer with a new larger washer supplied in the repair kit.
3. Remove plastic washer and adjustable nut from Reseater Tool.
4. Slide guide cone onto tool and insert the Reseater Tool into the faucet opening, centering the cone in the opening. If the cone tapers are too thin, trim them back until the cone engages the faucet opening.
5. Reattach the washer and adjustable nut and set the adjustable nut height to slightly above the opening.
6. Apply liquid or soap to the tool’s plastic washer.
7. Insert the T-handle into the tool.
8. Without applying excessive pressure, turn the Reseater Tool clockwise three full turns while tightening the cap nut.
9. Remove tool from faucet.
10. Inspect seat for smoothness. Repeat if necessary.
11. Reassemble and check for leaks.
Additional Images:
Product Dimensions:
|
Length (in): |
|
Weight (lbs): |
|
|
Width (in): |
|
|
Height (in): |
|
Instructions & FAQ's:
Coming soon
Single Package:
|
SKU
|
UPC
|
Length
|
Width
|
Depth
|
Weight
|
Cube
|
Package Type
|
|
1841
|
01841 0
|
0.000
|
0.000
|
0.000
|
0.275
|
104.55859375
|
Carded
|
Shelf Pack:
|
Length
|
Width
|
Depth
|
Weight
|
Cube
|
Shelf Pack Qty
|
|
3.25
|
3.625
|
8.875
|
32
|
104.55859375
|
3
|