Features:

• Two measurement modes: Pin and pinless
• Pin mode uses replaceable pins at end of 46 in. cable; pinless mode uses integral ball sensor with up to 4 in. measurement depth
• Displays % WME or relative readings simultaneously on two displays: 0 to 99.9 count jumbo LCD, and 40-dot tri-color LED Bargraph
• Spare pins storage compartment
• Auto-calibrating
• Data hold function
• Low battery warning
• User can set beeper sound, auto power off time, backlight function
• Superior to flat bottom sensors by enabling the user to measure in corners, hard-to-reach areas and narrow spaces
• Small contact area for improved repeatability
• Spherical sensor works on uneven surfaces and corners
• Works at any angle
• Can accommodate wide viewing angle
• Keeps hand away from sensing area, reducing interference

Specifications:

• Measurement Range: 0 to 99.9% WME (Wood Moisture Equivalent) or REL
• Measurement Accuracy: ±(3% of reading +5 digits)
• Pin Length/Type: 3/16 in. (4.76mm) stainless steel
• External Probe Cable Length: 46 in. (1.168m)
• Spherical Ball Sensor Measurement Depth: 4 in. (101.6mm)
• Ball Sensor Diameter: 1 in. (25.4mm)
• LCD Digit Height: 0.9 in. (22.9mm)
• LCD Resolution: 0.1%
• LED Bargraph Composition/Colors: 40 dots/green, red, yellow
• Operating Current: 70 mADC max
• Operating Temperature: 32° to 122°F (0° to 50°C)
• Dimensions: 9 x 2.75 x 1.625 in. (229 x 70 x 41mm)
• Weight: 8 oz. (249g)
• Power Source: 1 “9V” battery (included)

Includes:

• Remote Probe
• 1 “9V” Battery
• 2 Sets of Spare Pins
• Hard Carrying Case
• User’s Manual and Warranty