3000 Amp Flex Clamp Adaptor

ITEM # FX3000

3000 Amp Flex Clamp Adaptor

The #FX3000 enables any clamp meter or multimeter to enclose thick or hard-to-reach conductors while increasing its AC current measurement range to up to 3000A.


Best For:



  • Three full-scale ranges
  • The long probe creates a 6 in. diameter loop
  • 1% accurate readings
  • The probe is safe for CAT III 1000V, CAT IV 600V use. THe converter is safe for CAT II 1000V, CAT III 600V use


  • Measurement ranges: 0 to 30A/300A3000A
  • Conversion ratios: 1mVAC/A in 3000A range; 10mVAC/A in 300A range; 100mVAC/A in 30A range
  • Accuracy: ±1% of full-scale value
  • Position error: ±1% @ 1 in. from conductor; ±2% @ 2 in.; ±3% @ 3 in.
  • Safety ratings: CAT III 1000V, CAT IV 600V (probe); CAT II 1000V, CAT III 600V (converter)
  • Probe length: 18 in. (458mm)
  • Cable length (probe to converter): 6 ft. (1.8m)
  • Input impedance: 10kΩ, minimum
  • Operating temperature: 32° to 122°F (0° to 50°C) @ <80% RH
  • Weight (including batteries): 11.4 oz. (325g)
  • Power source: Two "AAA" batteries (included)


  • Converter
  • Non-detachable probe plus non-detachable 90° banana plug output leads
  • Batteries
  • 1-year limited warranty